Introduction to Factory Supporting Spiral Door, High speed Spiral Door advantages, characteristics and principles

Factory Supporting Spiral DoorIt is a professional industrial door equipment with high wind resistance, high sealing and long service life, which adopts cemented carbide door panel and turbine drive technology.，High-performance motor and drive system work together to provide powerful power for door panels. The motor transmits power to the door panel through the transmission device, and cooperates with the encoder to monitor the position and running speed of the door panel in real time to realize accurate control. With strong power, the door panel can open quickly, meeting the requirements of high frequency and high efficiency.，is a popular Factory Supporting Spiral Door，modern technology，The price is more affordable。

1、Brief introduction of Factory Supporting Spiral Door

Factory Supporting Spiral DoorIt is a professional industrial door equipment with high wind resistance, high sealing and long service life, which adopts cemented carbide door panel and turbine drive technology.。

Factory Supporting Spiral Door

2、Factory Supporting Spiral Door principle

The principle of Factory Supporting Spiral Door is introduced as follows:

1. High speed drive

High-performance motor and drive system work together to provide powerful power for door panels. The motor transmits power to the door panel through the transmission device, and cooperates with the encoder to monitor the position and running speed of the door panel in real time to realize accurate control. With strong power, the door panel opens quickly, meeting the requirements of high frequency and high efficiency.

2. Turbine guide

Unique turbine circular arc track system, the pulleys on both sides of the door panel roll in the track. When the motor drives the door panel to move, the turbine track provides guidance and support for the door panel, which reduces the friction of the door panel during operation, realizes smooth and high-speed opening and closing, and reduces the running noise.

3. Fast drive

Equipped with high-performance motor and drive system, it can provide powerful power and make the door open and close quickly in a short time. Generally, the opening speed can reach about 1-2 meters per second, which meets the requirements of some places with high traffic efficiency, such as logistics warehouses and factory workshops. ?

4. Sealing and heat preservation

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door. When the door body is closed, the rubber strip and the sealing device are closely attached to the door frame to form a good sealing structure, which effectively blocks indoor and outdoor heat transfer, and at the same time blocks dust and noise, thus maintaining the indoor environment stability.

5. Hard door panel

Door panels are usually made of high-strength aluminum alloy or other hard materials, and are filled with materials such as heat preservation and sound insulation. This structure makes the door have high strength and rigidity, can resist certain external impact, and also has good thermal insulation and sound insulation performance.

Factory Supporting Spiral Door

3、Factory Supporting Spiral Door function

Factory Supporting Spiral Doormultifunctional, with functions such as attractive and durable, Flexible opening and closing, Intelligent control, Safety protection and Efficient heat preservation，the principle is simple.Door panels are usually made of high-strength aluminum alloy or other hard materials, and are filled with materials such as heat preservation and sound insulation. This structure makes the door have high strength and rigidity, can resist certain external impact, and also has good heat preservation and sound insulation performance.，it is widely used in automobile, airport, cold store, new energy and airport，support customization。

Factory Supporting Spiral Door

4、Factory Supporting Spiral Door structure composition

The Factory Supporting Spiral Door structure is introduced as follows:

1. Drive system

The combination of high-performance motor and drive system, with encoder, provides strong power, realizes high-speed opening and closing, and accurately controls the position of door panel.

2. Door panel structure

It is made of aluminum alloy, filled with high-density polyurethane foam, and striped on the surface, which has high strength, heat preservation and aesthetics.

3. Turbine orbit

Unique circular arc turbine track system, the door panel runs in the track, reducing friction, running smoothly and with low noise, and prolonging service life.

4. leak tight structure

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door, which tightly fits when closed to ensure excellent sealing performance.

5. Security component

Double-screen induction and emergency stop buttons are standard, and some of them are equipped with airbags, wire rope breakage protection, etc., to ensure safe operation in all directions and prevent accidents.

Factory Supporting Spiral Door

5、Working principle of Factory Supporting Spiral Door

The principle of Factory Supporting Spiral Door is introduced as follows:

1. Turbine guide

Unique turbine circular arc track system, the pulleys on both sides of the door panel roll in the track. When the motor drives the door panel to move, the turbine track provides guidance and support for the door panel, which reduces the friction of the door panel during operation, realizes smooth and high-speed opening and closing, and reduces the running noise.

2. Hard door panel

Door panels are usually made of high-strength aluminum alloy or other hard materials, and are filled with materials such as heat preservation and sound insulation. This structure makes the door have high strength and rigidity, can resist certain external impact, and also has good thermal insulation and sound insulation performance.

3. High speed drive

High-performance motor and drive system work together to provide powerful power for door panels. The motor transmits power to the door panel through the transmission device, and cooperates with the encoder to monitor the position and running speed of the door panel in real time to realize accurate control. With strong power, the door panel opens quickly, meeting the requirements of high frequency and high efficiency.

4. Sealing and heat preservation

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door. When the door body is closed, the rubber strip and the sealing device are closely attached to the door frame to form a good sealing structure, which effectively blocks indoor and outdoor heat transfer, and at the same time blocks dust and noise, thus maintaining the indoor environment stability.

5. Turbine orbit

The unique turbine track system is adopted, and the door panel runs in the turbine track. This kind of track system can make the door panel open and close more smoothly, and at the same time, it can effectively reduce the friction between the door panel and the track, reduce the noise and prolong the service life of the door.

Factory Supporting Spiral Door

Factory Supporting Spiral DoorAlso called hard quick shutter door, it is a kind of high-speed door body with hard aluminum alloy door panel as the main body.，the product looks beautiful.。