What is a Hard Non-Standard Spiral Door? Introduction to the advantages and characteristics of the High speed Spiral Door

Hard Non-Standard Spiral DoorAs an efficient and durable industrial door equipment.，is a common Hard Non-Standard Spiral Door，It is mostly used in New energy battery factory building, High-end automobile production line, Medical aseptic workshop, Airport freight passage, High-end automobile production line, Medical aseptic workshop and so on，multifunctional, with functions such as smooth running, Efficient heat preservation, Safety protection, Flexible opening and closing and attractive and durable，is based on Anbixin is carefully developed by Anbixin combined with advanced technology。

1、Brief introduction of Hard Non-Standard Spiral Door

Hard Non-Standard Spiral DoorIt is a kind of high-performance industrial rapid door opening and closing equipment, which is mainly used in industrial workshops, warehousing and logistics places, and can realize rapid opening and closing, effectively isolate the space, prevent dust and keep warm.。

Hard Non-Standard Spiral Door

2、Hard Non-Standard Spiral Door application

Hard Non-Standard Spiral Doors have the following purposes.

1. Medical aseptic workshop

Tightly sealed and insulated, to prevent air convection pollution, to maintain a sterile environment in the workshop, in line with pharmaceutical production standards.

2. Cold storage area

Good thermal insulation performance, reducing cold loss, fast opening and closing to reduce cold loss when opening the door, saving energy.

3. Airport freight passage

Resist bad weather such as strong wind, pass quickly and efficiently, and meet the frequent transportation needs of airport freight.

4. New energy battery factory building

Stable wind resistance, sealing and dust isolation, providing a stable environment for the production of new energy batteries and ensuring product quality.

5. High-end automobile production line

Ultra-high-speed opening and closing match the rhythm of automobile production, which is firm and impact-resistant, ensuring the efficient operation of the production line.

Hard Non-Standard Spiral Door

3、Introduction of advantages of Hard Non-Standard Spiral Door

The advantages of Hard Non-Standard Spiral Door are as follows:

1. Good wind resistance

It can resist strong wind, and the special structure and material selection make the door body stable in bad weather. It is suitable for factories, warehouses and other places with high requirements for building protection in coastal areas.

2. Adapt to complex environment

No matter in high temperature, low temperature, humidity or corrosive environment, the turbo hard shutter can run stably with strong weather resistance, and can work normally in the environment of-30℃-70℃ to meet the needs of various special scenes.

3. Security intelligence

Multiple safety protection devices and intelligent control system ensure safe and stable operation and accurate and convenient operation.

4. Multiple safety protection

Double light curtain induction and emergency stop device are standard, which can respond quickly when encountering obstacles; Some products are also equipped with airbags, wire rope breakage protection, etc., to ensure the safety of personnel and goods in all directions.

5. Intelligent and convenient control

Equipped with advanced intelligent control system, it supports remote control, automatic induction (such as radar induction, geomagnetic induction) and other opening modes, and can also be linked with access control, PLC and other systems, which can be flexibly adjusted according to the needs of different scenes, with simple operation and improved traffic convenience and management efficiency.

Hard Non-Standard Spiral Door

4、Advantages of Hard Non-Standard Spiral Door principle

The Hard Non-Standard Spiral Door has the following principles.

1. High speed drive

High-performance motor and drive system work together to provide powerful power for door panels. The motor transmits power to the door panel through the transmission device, and cooperates with the encoder to monitor the position and running speed of the door panel in real time to realize accurate control. With strong power, the door panel opens quickly, meeting the requirements of high frequency and high efficiency.

2. Fast drive

Equipped with high-performance motor and drive system, it can provide powerful power and make the door open and close quickly in a short time. Generally, the opening speed can reach about 1-2 meters per second, which meets the requirements of some places with high traffic efficiency, such as logistics warehouses and factory workshops. ?

3. Hard door panel

Door panels are usually made of high-strength aluminum alloy or other hard materials, and are filled with materials such as heat preservation and sound insulation. This structure makes the door have high strength and rigidity, can resist certain external impact, and also has good thermal insulation and sound insulation performance.

4. Sealing and heat preservation

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door. When the door body is closed, the rubber strip and the sealing device are closely attached to the door frame to form a good sealing structure, which effectively blocks indoor and outdoor heat transfer, and at the same time blocks dust and noise, thus maintaining the indoor environment stability.

5. Turbine orbit

The unique turbine track system is adopted, and the door panel runs in the turbine track. This kind of track system can make the door panel open and close more smoothly, and at the same time, it can effectively reduce the friction between the door panel and the track, reduce the noise and prolong the service life of the door.

Hard Non-Standard Spiral Door

5、Hard Non-Standard Spiral Door work site real shot

Hard Non-Standard Spiral Door HD real shot, a variety of specifications and models display, for our customers to choose at will.。

Hard Non-Standard Spiral Door

Note: All the pictures in this article were taken by Anbixin door industry manufacturer.。

6、Structural characteristics of Hard Non-Standard Spiral Door

The Hard Non-Standard Spiral Door structure is introduced as follows:

1. Drive system

The combination of high-performance motor and drive system, with encoder, provides strong power, realizes high-speed opening and closing, and accurately controls the position of door panel.

2. Turbine orbit

Unique circular arc turbine track system, the door panel runs in the track, reducing friction, running smoothly and with low noise, and prolonging service life.

3. leak tight structure

EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door, which tightly fits when closed to ensure excellent sealing performance.

4. Security component

Double-screen induction and emergency stop buttons are standard, and some of them are equipped with airbags, wire rope breakage protection, etc., to ensure safe operation in all directions and prevent accidents.

5. Door panel structure

It is made of aluminum alloy, filled with high-density polyurethane foam, and striped on the surface, which has high strength, heat preservation and aesthetics.

Hard Non-Standard Spiral Door

Hard Non-Standard Spiral Doorat runtime,Unique turbine circular arc track system, the pulleys on both sides of the door panel roll in the track. When the motor drives the door panel to move, the turbine track provides guidance and support for the door panel, which reduces the friction of the door panel during operation, realizes smooth and high-speed opening and closing, and reduces the running noise.，Also known as hard turbine door, industrial hard speed door or turbine lifting speed door, it is an automatic door body driven by motor, driven by turbine reel to quickly lift the hard door panel, and guided by unique track structure.。