Introduction to Industrial gate Sectional Door, how much is the price of the Sectional Door?

Industrial gate Sectional Door It is an industrial door device with high efficiency and quick opening and closing.。

1、Brief introduction of Industrial gate Sectional Door

Industrial gate Sectional Door It is a kind of door equipment used for the entrance and exit of industrial places.，widely used in industry, cold chain, automobile, aviation, logistics and other fields，the advantage is It is made of high-strength colored steel plate or steel skeleton, matched with high-quality filling materials, and treated with anti-corrosion and anti-rust, which has the advantages of impact resistance, wear resistance and long service life.、Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.、Door panels are usually made of double-sided colored steel plates filled with polyurethane to ensure long-term use.、Polyurethane and other filling materials can effectively block heat transfer, reduce indoor and outdoor heat exchange, reduce energy consumption and keep indoor temperature stable.、The interior is filled with thermal insulation materials, which effectively blocks heat transfer, reduces energy consumption and maintains indoor temperature stability.，customizable。

Industrial gate Sectional Door

2、Industrial gate Sectional Door performance advantage

Industrial gate Sectional Door s have the following advantages.

1. Flexible and convenient installation

There are various installation methods, and the site requirements are low. According to the size of the doorway, the space and depth of the upper and lateral parts, standard lifting, high lifting, vertical lifting and inclined top lifting can be selected.

2. Run smoothly and smoothly

The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.

3. Complete security guarantee

Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.

4. Complete security guarantee

Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.

5. Various control methods

Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.

Industrial gate Sectional Door

3、Structural advantages of Industrial gate Sectional Door

The Industrial gate Sectional Door has the following structure

1. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

2. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

3. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

4. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

5. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

Industrial gate Sectional Door

4、Advantages of Industrial gate Sectional Door principle

The Industrial gate Sectional Door has the following principles.

1. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

2. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

3. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

4. Balanced system

Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during opening and closing, reduce the load of the motor, and ensure that the door can be stably stopped at any position.

5. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

Industrial gate Sectional Door

5、Industrial gate Sectional Door field real shot

the product looks beautiful., advanced technology, complete specifications and models。

Industrial gate Sectional Door

Note: All the pictures in this article were taken by Anbixin door industry manufacturer.。

6、Industrial gate Sectional Door price consultation

The Industrial gate Sectional Door price is introduced as follows:

1. Product configuration difference

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Industrial gate Sectional Door , which is beyond doubt. Anbixin makes every product with great care in the attitude of being highly responsible to customers, so the price of Anbixin door industry Industrial gate Sectional Door is reasonable for products with the same configuration.

2. Company size

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Industrial gate Sectional Door is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Industrial gate Sectional Door is much higher, so customers should choose products directly sold by manufacturers when purchasing.

3. product model

Because there are many models of each product, different customers have different requirements for product performance, and the product specifications and models that are inevitably used will be different. Different models of the same product will lead to different prices.

4. marketing channel

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

5. Reasonable cost

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. Anbixin has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

Industrial gate Sectional Door

Industrial gate Sectional Door Also called industrial lifting door, it is a door device with vertical lifting function.，usually used in industry, cold chain, aviation, automobile, logistics and other fields。