Introduction to Industrial industrial Sectional Door and Sectional Door advantages and features

Industrial industrial Sectional Door As an efficient and practical industrial door equipment，The price is more affordable。

1、Brief introduction of Industrial industrial Sectional Door

Industrial industrial Sectional Door It is a kind of door equipment used for the entrance and exit of industrial places.，widely used in aviation, cold chain, industry, automobile, logistics and other fields，Run smoothly and smoothly,Flexible installation mode,sturdy and durable,Multiple safety protection,Flexible installation。

Industrial industrial Sectional Door

2、Industrial industrial Sectional Door function

Industrial industrial Sectional Door it has the functions of sturdy and durable, attractive and durable, Wind resistance and stability, Flexible opening and closing and smooth running，it has been widely used in automobile, cold chain, industry, aviation, logistics and other industries。

Industrial industrial Sectional Door

3、Functional advantages of Industrial industrial Sectional Door

Industrial industrial Sectional Door s have the following advantages.

1. Excellent sealing performance

Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded and keep the room clean and dry.

2. Strong wind resistance

The structural design is reasonable, and some lifting doors can resist strong winds. For example, the torsion spring rib lifting structure is adopted to make the door body more firm.

3. Run smoothly and smoothly

The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.

4. sturdy and durable

It is made of high-strength colored steel plate or steel skeleton, matched with high-quality filling materials, and treated with anti-corrosion and anti-rust, which has the advantages of impact resistance, wear resistance and long service life.

5. Beautiful appearance design

A variety of colors are available, and the embossed design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.

Industrial industrial Sectional Door

4、Industrial industrial Sectional Door display

Industrial industrial Sectional Door HD factory map, all-round shooting, for our customers to visit.。

Industrial industrial Sectional Door

Note: All the pictures in this article were taken by Anbixin door industry manufacturer.。

5、Industrial industrial Sectional Door structure composition

The Industrial industrial Sectional Door structure is introduced as follows:

1. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

2. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

3. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

4. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

5. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

Industrial industrial Sectional Door

6、Working principle of Industrial industrial Sectional Door

The principle of Industrial industrial Sectional Door is introduced as follows:

1. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

2. Balanced system

Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during opening and closing, reduce the load of the motor, and ensure that the door can be stably stopped at any position.

3. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

4. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

5. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

Industrial industrial Sectional Door

Industrial industrial Sectional Door it is mainly composed of Drive system, security apparatus/device/equipment, Door panel structure, control system and Track device，is a Industrial industrial Sectional Door 。