Introduction to Customized PVC stacking door, advantages, characteristics and principles of Stacking Rapid Door

Customized PVC stacking doorAs a high-performance industrial door equipment，usually used in spin and weave, medicine, logistics, food, Super and other fields，it is an ideal choice for customers to buy Customized PVC stacking door。

1、Brief introduction of Customized PVC stacking door

Customized PVC stacking doorAlso known as flexible stacking door, high-speed stacking door or industrial stacking door.，It has a wide range of uses, and is often used inTextile and garment warehouse,Large supermarket back door,Food processing workshop,Logistics high-speed channel,Large supermarket back door and so on，the advantage is Support radar induction, geomagnetic induction, remote control switch, manual button and other control modes, which can be switched freely according to the use scene, and can also be linked with access control system and PLC control system.、Equipped with multiple safety devices, such as anti-falling, infrared sensing, etc., it runs smoothly and ensures the safety of personnel and goods.、Equipped with infrared safety protection device, airbag, wire rope breakage protection, etc., it will automatically stop and run in reverse when encountering obstacles, so as to avoid pinching people and objects and ensure the safety of people and goods.、The door curtain is closely attached to the door frame around, and the bottom is provided with an airtight airbag, which can effectively block airflow, dust and mosquitoes, prevent the loss of cold and warm airflow, and maintain a clean indoor environment.、Quickly open and close to reduce air convection, with the door curtain made of high-efficiency thermal insulation material, reduce indoor heat or cold air loss and save energy consumption of air conditioning.。

Customized PVC stacking door

2、Working principle of Customized PVC stacking door

The principle of Customized PVC stacking door is introduced as follows:

1. Motor and transmission

Driven by motor, the door body is folded and unfolded by chain transmission system. The power of the motor is transmitted to the connection points of each door panel, so that the door panels can be folded and stacked in an orderly manner.

2. chain and sprocket drive

As a power source, the motor transmits the power to the transmission parts of the door curtain through the chain. The chain is meshed with the sprocket or gear at the top of the door curtain. When the motor rotates, the chain drives the sprocket or gear to rotate, and then drives the door curtain to fold and unfold, thus ensuring the stability and reliability of the door body.

3. Folding accumulation

The door body is composed of a plurality of door panels connected by hinges. When the door panels are opened, they are folded up and piled up above the door opening section by section like an accordion. This design can achieve a larger opening area in a limited space and is suitable for places with larger door openings. ?

4. control system

Equipped with advanced control system, it can realize various control modes, such as button control, remote control and induction control. The control system can accurately control the running speed and stroke of the motor, ensure that the door body runs accurately according to the set program, and also has the safety protection function, and automatically stops or rebounds in case of obstacles.

5. Sealing block flow

The bottom of the door curtain is equipped with a weighted air barrier cloth or an airtight airbag, and when the door body is closed, the air barrier cloth or airbag is closely attached to the ground; Windproof brushes are installed on both sides of the doorpost, which are in close contact with the side of the door curtain. These sealing structures effectively block the entry of airflow, dust and mosquitoes, and keep the indoor environment clean and the temperature stable.

Customized PVC stacking door

3、Customized PVC stacking door characteristics

The Customized PVC stacking door features are as follows:

1. Rapid folding and stacking

Fast opening speed, saving time.

2. Comprehensive safety protection

A variety of protection to avoid accidents

3. Good sealing and gas isolation

Block cold and hot air flow and maintain room temperature.

4. Flexible cushioning design

Reduce impact and prolong life.

5. Low maintenance cost

Simple structure and convenient maintenance.

Customized PVC stacking door

4、Structural advantages of Customized PVC stacking door

The Customized PVC stacking door has the following structure

1. Track layout

The circular track at the top provides space for the folding of the door curtain, and the wind-proof brush is installed on the side track to enhance the sealing performance; Track design ensures that the curtain runs smoothly and occupies little space.

2. Drive system

Driven by motor and matched with chain transmission mechanism, the power is transmitted to the door curtain to realize the rapid folding and unfolding of the door body.

3. Bottom device

The bottom-weighted air barrier cloth or airtight airbag is closely attached to the ground, effectively blocking airflow and dust and improving sealing effect.

4. control unit

Support button, remote control, radar induction, geomagnetic induction and other control modes, and accurately adjust the motor operation through the controller to meet the needs of different scenes.

5. Door curtain structure

It is composed of several pieces of high-strength PVC base cloth, and the built-in polyester fiber grid cloth enhances the wind resistance. The pieces are connected by special connectors and can be flexibly folded and piled up.

Customized PVC stacking door

5、On-site real shot of Customized PVC stacking door

The details of the Customized PVC stacking door are displayed in many directions, and the Customized PVC stacking door is beautiful and cost-effective.。

Customized PVC stacking door

Note: All the pictures in this article were taken by Anbixin manufacturer.。

6、Customized PVC stacking door price advantage

The Customized PVC stacking door price is introduced as follows:

1. Configuration difference

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Customized PVC stacking door, which is beyond doubt. Anbixin makes every product with great care in the attitude of being highly responsible to customers, so the price of Anbixin door industry Customized PVC stacking door is reasonable for products with the same configuration.

2. type of operation

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

5. regional advantages

The price of Customized PVC stacking door in Jiangsu(Province) is much lower than that in other regions, and Anbixin is a self-produced and self-selling Customized PVC stacking door manufacturer not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Customized PVC stacking door price positioning more reasonable, low-cost and economical.

Customized PVC stacking door

Customized PVC stacking doorthe advantage is Modular design, easy replacement of door curtain, motor and other parts, simple troubleshooting, and wear-resistant and aging-resistant materials, long service life and reduced maintenance frequency.、Open the back door body and fold it upward for accumulation, which does not occupy the floor space and is suitable for places with large door openings and limited space.、The door curtain is composed of several pieces of PVC base cloth, which is stacked and folded by circular track, occupying small space, and it can be easily installed even if the door opening is large in size, and has low requirements for top space.、The folding and stacking design of the door body has fast opening speed, greatly improving the traffic efficiency and reducing the waiting time.、The door curtain is closely attached to the door frame around, and the bottom is provided with an airtight airbag, which can effectively block airflow, dust and mosquitoes, prevent the loss of cold and warm airflow, and maintain a clean indoor environment.，it has the characteristics of Intelligent control, Simple and beautiful appearance, Intelligent control is convenient, Low maintenance cost and Flexible stacking structure。