Introduction to Lifting type industrial Sectional Door and Sectional Door working principle

Lifting type industrial Sectional Door Also called industrial lifting door, it is a door device with vertical lifting function.，A variety of colors are available, and the embossed surface design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.、The structural design is reasonable, and some lifting doors can resist 10-level wind speed. For example, the torsion spring rib lifting structure is adopted to make the door body more firm.、Polyurethane and other filling materials can effectively block heat transfer, reduce indoor and outdoor heat exchange, reduce energy consumption and keep indoor temperature stable.、Door panels are usually made of double-sided colored steel plates filled with polyurethane to ensure long-term use.、Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.。The following is to introduce the Lifting type industrial Sectional Door :

1、Brief introduction of Lifting type industrial Sectional Door

Lifting type industrial Sectional Door Also known as industrial sliding doors, vertical lifting door or electric lifting door, it is a kind of door body equipment that relies on motor drive and guide rail to realize lifting movement.，Excellent sound insulation and noise reduction,Various control methods,Flexible installation,Strong, wind-resistant and stable,Tightly sealed and dustproof，has been favored by more and more customers.。

Lifting type industrial Sectional Door

2、Lifting type industrial Sectional Door function

Lifting type industrial Sectional Door it has the functions of attractive and durable, sturdy and durable, Intelligent control, smooth running and Wind resistance and stability。

Lifting type industrial Sectional Door

3、Lifting type industrial Sectional Door structure

The Lifting type industrial Sectional Door structure is introduced as follows:

1. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

2. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

3. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

4. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

5. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

Lifting type industrial Sectional Door

4、Lifting type industrial Sectional Door principle

The Lifting type industrial Sectional Door has the following principles.

1. Balanced system

Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during opening and closing, reduce the load of the motor, and ensure that the door can be stably stopped at any position.

2. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

3. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

4. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

5. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

Lifting type industrial Sectional Door

5、How much is the Lifting type industrial Sectional Door ?

The Lifting type industrial Sectional Door price is introduced as follows:

1. product model

Different product models will also affect the price changes. Different specifications and models will lead to different product prices.

2. quality

Quality is an important and fundamental factor that affects the price of Lifting type industrial Sectional Door . In the final analysis, its price depends on its quality. Usually, Lifting type industrial Sectional Door with better quality will cost more, and such products have better effects, longer service life and more advanced technology. A Lifting type industrial Sectional Door with a relatively general quality will cost less, have a shorter service life and have a relatively general use effect.

3. Reasonable sales model

If there is no middleman to earn the difference, then the Lifting type industrial Sectional Door price will naturally decrease. Anbixin door industry adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

4. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Lifting type industrial Sectional Door price and service can meet the actual needs of customers.

5. Brand strength

At present, there are various brands of Lifting type industrial Sectional Door in Jiangsu(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Lifting type industrial Sectional Door are different.

Lifting type industrial Sectional Door

6、company strength

The company has many years of Lifting type industrial Sectional Door manufacturing experience, large scale and strong strength.。

Anbixin

Lifting type industrial Sectional Door Widely used in Automobile manufacturing workshop, Logistics distribution center, Logistics distribution center, Cold chain storage place and Industrial workshop warehouse，As an efficient and practical industrial door equipment，the product looks beautiful.。