Aluminum alloy single-layer Sectional Door detailed introduction

Aluminum alloy single-layer Sectional DoorIt is a professional door equipment with vertical lifting mode, which can effectively save space and has good sealing and thermal insulation performance.，The overall structural design is simple, diverse and beautiful.，Structure consists of Drive system, Door panel structure, security apparatus/device/equipment, Track device, control system and so on，It is made of high-strength colored steel plate or steel skeleton, matched with high-quality filling materials, and treated with anti-corrosion and anti-rust, which has the advantages of impact resistance, wear resistance and long service life.、Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded, and keep the room clean and dry.、There are various installation methods, and the site requirements are low. According to the size of the doorway, the space and depth of the upper and lateral parts, standard lifting, high lifting, vertical lifting and inclined top lifting can be selected.、A variety of colors are available, and the embossed surface design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.、The structural design is reasonable, and some lifting doors can resist 10-level wind speed. For example, the torsion spring rib lifting structure is adopted to make the door body more firm.，it has been widely used in aviation, logistics, cold chain, industry, cold chain and other industries，multifunctional, with functions such as Efficient heat preservation, Wind resistance and stability, Sound insulation and noise reduction, Safety protection and Flexible opening and closing。

1、Brief introduction of Aluminum alloy single-layer Sectional Door

Aluminum alloy single-layer Sectional DoorAlso called industrial lifting door, it is a door device with vertical lifting function.，It is a product series that integrates Aircraft maintenance depot, Cold chain storage place, Logistics distribution center, Aircraft maintenance depot and Logistics distribution center，is a popular Aluminum alloy single-layer Sectional Door。

Aluminum alloy single-layer Sectional Door

2、Advantages of Aluminum alloy single-layer Sectional Door principle

The principle of Aluminum alloy single-layer Sectional Door is introduced as follows:

1. Balanced system

Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during opening and closing, reduce the load of the motor, and ensure that the door can be stably stopped at any position.

2. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

3. Balance assist

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

4. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

5. Guide rail guidance

Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

Aluminum alloy single-layer Sectional Door

3、Aluminum alloy single-layer Sectional Door real shot picture

High-definition pictures of various types of Aluminum alloy single-layer Sectional Door are displayed for customers who are about to buy. Please submit a telephone appointment for physical inspection.。

Aluminum alloy single-layer Sectional Door

Note: All the pictures in this article were taken by Anbixin door industry manufacturer.。

4、Aluminum alloy single-layer Sectional Door structure composition

The Aluminum alloy single-layer Sectional Door has the following structure

1. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

2. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

3. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

4. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

5. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

Aluminum alloy single-layer Sectional Door

5、Aluminum alloy single-layer Sectional Door HD real shot

Different specifications and models of high-definition pictures, so that everyone can see enough at once.。

Aluminum alloy single-layer Sectional Door

Note: All the pictures in this article were taken by Anbixin door industry manufacturer.。

6、Company preferential activities

Aluminum alloy single-layer Sectional Door is a new type of Garage Door introduced by Jiangsu anbixin internet of things technology co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for logistics and other industries. Now consult Anbixin door industryAluminum alloy single-layer Sectional Door, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

Anbixin

Aluminum alloy single-layer Sectional DoorIt is mostly used in Cold chain storage place, Automobile manufacturing workshop, Industrial workshop warehouse, Aircraft maintenance depot, Logistics distribution center, Industrial workshop warehouse and so on，Excellent sound insulation and noise reduction,Efficient heat preservation,Flexible and convenient installation,Smooth and quiet operation,Multiple safety protection。