Anbixin  Industrial Doors+86 198 5167 5299

Brief introduction and advantages of Car Wash Bay Special Spiral Door

2025-7-9

Car Wash Bay Special Spiral DoorIt is a kind of high-performance industrial rapid door opening and closing equipment, which is mainly used in industrial workshops, warehousing and logistics places, and can realize rapid opening and closing, effectively isolate the space, prevent dust and keep warm.,at the start of the operation,The unique turbine track system is adopted, and the door panel runs in the turbine track. This kind of track system can make the door panel open and close more stably, and at the same time, it can effectively reduce the friction between the door panel and the track, reduce the noise and prolong the service life of the door.,the advantage is The door body is made of double-layer stretched aluminum plate, and its strength is super ordinary color steel plate. With the turbine track system, it runs smoothly, and the door panels do not touch each other when rolled up, which greatly reduces wear and deformation, can realize multiple operations, has low annual maintenance cost and stable long-term use performance.、High-strength aluminum alloy door panels with turbine track system have good wind resistance and can resist strong winds.、It can resist strong wind, and the special structure and material selection make the door body stable in bad weather. It is suitable for factories, warehouses and other places with high requirements for building protection in coastal areas.、The turbo hard quick door has fast opening speed. Realize second-level opening and closing, and greatly shorten the waiting time for people and goods to enter and leave. In the logistics storage scene, it can significantly improve the efficiency of cargo handling; In the food cold storage, quick opening and closing can reduce the loss of cold air and temperature control.、Equipped with advanced intelligent control system, it supports remote control, automatic induction (such as radar induction and geomagnetic induction) and other opening modes, and can also be linked with access control, PLC and other systems, which can be flexibly adjusted according to the needs of different scenes, with simple operation and improved traffic convenience and management efficiency.。The following is to introduce the Car Wash Bay Special Spiral Door:

1、Brief introduction of Car Wash Bay Special Spiral Door

Car Wash Bay Special Spiral DoorAlso known as hard turbine door, industrial hard speed door or turbine lifting speed door.,it has the functions of Wind resistance and stability, Flexible opening and closing, Sealing and dustproof, Safety protection and sturdy and durable,be loved by our customers.。

Car Wash Bay Special Spiral Door

Car Wash Bay Special Spiral Door

2、Introduction of Car Wash Bay Special Spiral Door characteristics

Car Wash Bay Special Spiral Door has the following characteristics

  1. Flexible adaptation scenario
  2. Suitable for various industrial environments.

  3. Smooth and quiet operation
  4. Smooth operation and low noise.

  5. Fashion, beauty and atmosphere
  6. Design, enhance the style.

  7. Low consumption, energy saving and money saving
  8. Reduce energy consumption and save costs.

  9. Rugged and durable.
  10. Hard material, durable

Car Wash Bay Special Spiral Door

Car Wash Bay Special Spiral Door

3、Working principle of Car Wash Bay Special Spiral Door

The Car Wash Bay Special Spiral Door has the following principles.

  1. Hard door panel
  2. Door panels are usually made of high-strength aluminum alloy or other hard materials, and are filled with materials such as heat preservation and sound insulation. This structure makes the door have high strength and rigidity, can resist certain external impact, and also has good thermal insulation and sound insulation performance.

  3. High speed drive
  4. High-performance motor and drive system work together to provide powerful power for door panels. The motor transmits power to the door panel through the transmission device, and cooperates with the encoder to monitor the position and running speed of the door panel in real time to realize accurate control. With strong power, the door panel opens quickly, meeting the requirements of high frequency and high efficiency.

  5. High speed drive
  6. High-performance motor and drive system work together to provide powerful power for door panels. The motor transmits power to the door panel through the transmission device, and cooperates with the encoder to monitor the position and running speed of the door panel in real time to realize accurate control. With strong power, the door panel opens quickly, meeting the requirements of high frequency and high efficiency.

  7. Hard door panel
  8. Door panels are usually made of high-strength aluminum alloy or other hard materials, and are filled with materials such as heat preservation and sound insulation. This structure makes the door have high strength and rigidity, can resist certain external impact, and also has good thermal insulation and sound insulation performance.

  9. Sealing and heat preservation
  10. EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door. When the door body is closed, the rubber strip and the sealing device are closely attached to the door frame to form a good sealing structure, which effectively blocks indoor and outdoor heat transfer, and at the same time blocks dust and noise, thus maintaining the indoor environment stability.

Car Wash Bay Special Spiral Door

Car Wash Bay Special Spiral Door

4、Car Wash Bay Special Spiral Door field real shot

Provide a variety of specifications and models of Car Wash Bay Special Spiral Door, high-definition picture list.。

Car Wash Bay Special Spiral Door

Car Wash Bay Special Spiral Door

Note: All the pictures in this article were taken by Anbixin manufacturer.。

5、Car Wash Bay Special Spiral Door structure composition

The Car Wash Bay Special Spiral Door has the following structure

  1. leak tight structure
  2. EPDM rubber strip is installed at the edge and middle of the door panel, and an elastic sealing device is installed at the bottom of the door, which tightly fits when closed to ensure excellent sealing performance.

  3. Turbine orbit
  4. Unique circular arc turbine track system, the door panel runs in the track, reducing friction, running smoothly and with low noise, and prolonging service life.

  5. Door panel structure
  6. It is made of aluminum alloy, filled with high-density polyurethane foam, and striped on the surface, which has high strength, heat preservation and aesthetics.

  7. Security component
  8. Double-screen induction and emergency stop buttons are standard, and some of them are equipped with airbags, wire rope breakage protection, etc., to ensure safe operation in all directions and prevent accidents.

  9. Drive system
  10. The combination of high-performance motor and drive system, with encoder, provides strong power, realizes high-speed opening and closing, and accurately controls the position of door panel.

Car Wash Bay Special Spiral Door

Car Wash Bay Special Spiral Door

6、How to choose the right product manufacturer?

Choosing a suitable Car Wash Bay Special Spiral Door manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Car Wash Bay Special Spiral Door products that meet the demand and have good cost performance.。

Anbixin door industry

Anbixin door industry

Car Wash Bay Special Spiral DoorThe broken bridge design filled with polyurethane foam blocks indoor and outdoor heat conduction, effectively maintains indoor temperature stability, reduces energy consumption of air conditioning and heating, and has remarkable energy saving effect in cold storage and constant temperature workshop.、The polyurethane guide wheel slides in the aluminum alloy track, so the noise is low during operation, which creates a relatively quiet environment for workshops, warehouses and other working areas and reduces noise interference.、The door panels and edges are tightly sealed, and the interior is filled with high-quality thermal insulation materials, effectively isolating heat and noise.、The turbo hard quick door has fast opening speed. Realize second-level opening and closing, and greatly shorten the waiting time for people and goods to enter and leave. In the logistics storage scene, it can significantly improve the efficiency of cargo handling; In the food cold storage, quick opening and closing can reduce the loss of cold air and temperature control.、The edge and middle of the door panel are provided with EPDM rubber strip, which, together with the tight structural design, effectively blocks dust, wind and rain, insects and peculiar smell, keeps the indoor environment clean, and provides a strong guarantee for industries that require high cleanliness, such as food processing and electronic manufacturing.,is a common Car Wash Bay Special Spiral Door,at work,High-performance motor and drive system work together to provide powerful power for door panels. The motor transmits power to the door panel through the transmission device, and cooperates with the encoder to monitor the position and running speed of the door panel in real time to realize accurate control. With strong power, the door panel can open quickly, meeting the requirements of high frequency and high efficiency.。