Anbixin  Industrial Doors+86 198 5167 5299

Brief introduction and advantages of Electronics factory stacking door

2025-7-9

Electronics factory stacking doorAs a high-performance industrial door equipment,Simple structure and reliable operation.,the main structure includes Door curtain structure, Bottom device, control system, Track system and Drive system,it has been widely used in logistics, Super, food, logistics, medicine and other industries,the advantage is Modular design, easy replacement of door curtain, motor and other parts, simple troubleshooting, and wear-resistant and aging-resistant materials, long service life and reduced maintenance frequency.、The folding and stacking design of the door body has fast opening speed, greatly improving the traffic efficiency and reducing the waiting time.、Support radar induction, geomagnetic induction, remote control switch, manual button and other control modes, which can be switched freely according to the use scene, and can also be linked with access control system and PLC control system.、Open the back door body and fold it upward for accumulation, which does not occupy the floor space and is suitable for places with large door openings and limited space.、Equipped with infrared safety protection device, airbag, wire rope breakage protection, etc., it will automatically stop and run in reverse when encountering obstacles, so as to avoid pinching people and objects and ensure the safety of people and goods.,Commonly used inFood processing workshop,Logistics high-speed channel,Medicine warehouse,Large supermarket back door,Logistics high-speed channel and so on。The following is to introduce the Electronics factory stacking door:

1、Brief introduction of Electronics factory stacking door

Electronics factory stacking doorAlso known as flexible stacking door, high-speed stacking door or industrial stacking door.,at runtime,When the motor rotates, the chain drives the sprocket or gear to rotate, and then drives the door curtain to fold and unfold, thus ensuring the stability and reliability of the door body.,it is an ideal choice for customers to buy Electronics factory stacking door。

Electronics factory stacking door

Electronics factory stacking door

2、Electronics factory stacking door structure composition

The Electronics factory stacking door has the following structure

  1. Bottom device
  2. The bottom-weighted air barrier cloth or airtight airbag is closely attached to the ground, effectively blocking airflow and dust and improving sealing effect.

  3. Drive system
  4. Driven by motor and matched with chain transmission mechanism, the power is transmitted to the door curtain to realize the rapid folding and unfolding of the door body.

  5. control unit
  6. Support button, remote control, radar induction, geomagnetic induction and other control modes, and accurately adjust the motor operation through the controller to meet the needs of different scenes.

  7. Track layout
  8. The circular track at the top provides space for the folding of the door curtain, and the wind-proof brush is installed on the side track to enhance the sealing performance; Track design ensures that the curtain runs smoothly and occupies little space.

  9. Door curtain structure
  10. It is composed of several pieces of high-strength PVC base cloth, and the built-in polyester fiber grid cloth enhances the wind resistance. The pieces are connected by special connectors and can be flexibly folded and piled up.

Electronics factory stacking door

Electronics factory stacking door

3、Electronics factory stacking door video detail

Anbixin provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Electronics factory stacking door

As you can see from the live video.,Anbixin door industry usually used in spin and weave, medicine, food, spin and weave, Super and other fields。

4、Introduction of Electronics factory stacking door characteristics

Electronics factory stacking door has the following characteristics

  1. Small occupied space
  2. Does not occupy the ground, and adapts to the narrow space.

  3. Intelligent and convenient control
  4. Multi-control, easy to operate

  5. Colorful and optional
  6. Personalized customization, beautiful and fashionable

  7. Flexible cushioning design
  8. Reduce impact and prolong life.

  9. Good sealing and gas isolation
  10. Block cold and hot air flow and maintain room temperature.

Electronics factory stacking door

Electronics factory stacking door

5、Working principle of Electronics factory stacking door

The Electronics factory stacking door has the following principles.

  1. Sealing block flow
  2. The bottom of the door curtain is equipped with a weighted air barrier cloth or an airtight airbag, and when the door body is closed, the air barrier cloth or airbag is closely attached to the ground; Windproof brushes are installed on both sides of the doorpost, which are in close contact with the side of the door curtain. These sealing structures effectively block the entry of airflow, dust and mosquitoes, and keep the indoor environment clean and the temperature stable.

  3. chain and sprocket drive
  4. As a power source, the motor transmits the power to the transmission parts of the door curtain through the chain. The chain is meshed with the sprocket or gear at the top of the door curtain. When the motor rotates, the chain drives the sprocket or gear to rotate, and then drives the door curtain to fold and unfold, thus ensuring the stability and reliability of the door body.

  5. control system
  6. Equipped with advanced control system, it can realize various control modes, such as button control, remote control and induction control. The control system can accurately control the running speed and stroke of the motor, ensure that the door body runs accurately according to the set program, and also has the safety protection function, and automatically stops or rebounds in case of obstacles.

  7. Folding accumulation
  8. The door curtain is composed of several independent PVC base fabrics connected by hinges, and the motor drives the transmission mechanism to run, which drives the connector at the top of the door curtain to move upward. Each door curtain is folded in turn and stacked above the door opening like an accordion to realize the quick opening of the door body; When closed, the transmission mechanism moves in the opposite direction, and the door curtain is unfolded one by one and restored to its original state.

  9. Motor and transmission
  10. Driven by motor, the door body is folded and unfolded by chain transmission system. The power of the motor is transmitted to the connection points of each door panel, so that the door panels can be folded and stacked in an orderly manner.

Electronics factory stacking door

Electronics factory stacking door

6、Real-time shooting in Anbixin door industry's production workshop

The finished products of the Electronics factory stacking door factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Anbixin

Anbixin

The finished products of the Electronics factory stacking door factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Electronics factory stacking doorIt has a wide range of uses, and is often used inTextile and garment warehouse,Food processing workshop,Medicine warehouse,Large supermarket back door,Logistics high-speed channel and so on,it is widely used in Super, spin and weave, food, logistics, Super and other industries。