Brief introduction and advantages of Industrial electric Sectional Door

Industrial electric Sectional DoorIt is an industrial door device with high efficiency and quick opening and closing.，it has the functions of smooth running, Efficient heat preservation, Intelligent control, Sound insulation and noise reduction and Flexible opening and closing，the main features are Strong wind resistance, Strong, wind-resistant and stable, Good sound insulation and noise reduction, Multiple safety protection and The material is sturdy and durable.，is carefully developed by Anbixin door industry combined with advanced technology。The following is to introduce the Industrial electric Sectional Door:

1、Brief introduction of Industrial electric Sectional Door

Industrial electric Sectional DoorAlso known as industrial sliding doors, vertical lift door or electric lift door.。

Industrial electric Sectional Door

2、Industrial electric Sectional Door principle

The principle of Industrial electric Sectional Door is introduced as follows:

1. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

2. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

3. Balanced system

Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during opening and closing, reduce the load of the motor, and ensure that the door can be stably stopped at any position.

4. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

5. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

Industrial electric Sectional Door

3、Industrial electric Sectional Door function

Industrial electric Sectional Doormultifunctional, with functions such as Sealing and dustproof, Safety protection, Wind resistance and stability, sturdy and durable and attractive and durable，the product looks beautiful.，the advantage is Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.、Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.、Door panels are usually made of double-sided colored steel plates filled with polyurethane to ensure long-term use.、It is made of high-strength colored steel plate or steel skeleton, matched with high-quality filling materials, and treated with anti-corrosion and anti-rust, which has the advantages of impact resistance, wear resistance and long service life.、The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.，is a kind of high quality and low price Industrial electric Sectional Door，A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.。

Industrial electric Sectional Door

4、Industrial electric Sectional Door use

The purpose of Industrial electric Sectional Door is introduced as follows:

1. Industrial workshop warehouse

It is used for the entrance and exit of industrial workshops and large warehouses, ensuring the frequent entry and exit of goods transport vehicles, and its durable characteristics can resist daily collisions.

2. Aircraft maintenance depot

The oversize lift door is suitable for aircraft maintenance garage, which is convenient for aircraft to enter and exit, and it is wind-resistant and stable to deal with complex outdoor environment.

3. Automobile manufacturing workshop

Meet the requirements of large-scale equipment and vehicles in and out of the automobile production line, and maintain the stable production environment of the workshop with the function of heat preservation and sound insulation.

4. Logistics distribution center

Adapt to the oversized doorway of the logistics center, quickly lift and improve the turnover efficiency of goods, and the sealing performance is effective against dust and moisture.

5. Cold chain storage place

Excellent thermal insulation performance can reduce the loss of cold energy in the cold storage, maintain a low temperature environment and reduce energy consumption.

Industrial electric Sectional Door

5、Industrial electric Sectional Door real beat

Details of Anbixin Industrial electric Sectional Door,the product looks atmospheric.。

Industrial electric Sectional Door

Note: All the pictures in this article were taken by Anbixin door industry manufacturer.。

6、How to choose the right product manufacturer?

Choosing a suitable Industrial electric Sectional Door manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Industrial electric Sectional Door products that meet the demand and have good cost performance.。

Anbixin

Industrial electric Sectional Doorit has the functions of smooth running, sturdy and durable, Intelligent control, Wind resistance and stability and Flexible opening and closing，Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.、Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.、It effectively hinders the sound transmission, and both industrial noise and external noise can greatly reduce the volume introduced into the room.、A variety of lifting methods can be selected, which can be flexibly installed according to the size of the doorway and the space at the top and side of different venues, with strong adaptability.、Polyurethane and other filling materials can effectively block heat transfer, reduce indoor and outdoor heat exchange, reduce energy consumption and keep indoor temperature stable.，generally, it is composed of Drive system, Track device, Door panel structure, security apparatus/device/equipment, control system and other major components。