Brief introduction and advantages of Industrial factory Garage Door

Industrial factory Garage DoorIt is a kind of industrial door equipment that can be opened and closed efficiently and quickly. It is mainly used for the entrances and exits of industrial workshops, logistics warehouses and other places to achieve rapid isolation, heat preservation and dust prevention.，it has the characteristics of sturdy and durable, sturdy and durable, Flexible and convenient installation, The material is sturdy and durable. and Excellent thermal insulation，in the course of work,The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.，Mainly used forAutomobile manufacturing workshop,Industrial workshop warehouse,Aircraft maintenance depot,Logistics distribution center andCold chain storage place，it has been widely used in cold chain, logistics, aviation, automobile, industry and other industries。

1、Brief introduction of Industrial factory Garage Door

Industrial factory Garage DoorIt is a kind of door equipment used for entrances and exits of industrial places, which is mainly used to realize rapid opening and closing and isolation of entrances and exits of industrial workshops, warehouses and other places.，the advantage is There are various installation methods, and the site requirements are low. According to the size of the doorway, the space and depth of the upper and lateral parts, standard lifting, high lifting, vertical lifting and inclined top lifting can be selected.、A variety of lifting methods can be selected, which can be flexibly installed according to the size of the doorway and the space at the top and side of different venues, with strong adaptability.、The structural design is reasonable, and some lifting doors can resist 10-level wind speed. For example, the torsion spring rib lifting structure is adopted to make the door body more firm.、Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded, and keep the room clean and dry.、The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.，multifunctional, with functions such as attractive and durable, Sound insulation and noise reduction, Intelligent control, Safety protection and smooth running。

Industrial factory Garage Door

2、Industrial factory Garage Door structure

The Industrial factory Garage Door structure is introduced as follows:

1. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

2. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

3. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

4. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

5. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

Industrial factory Garage Door

3、Industrial factory Garage Door principle

The Industrial factory Garage Door has the following principles.

1. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

2. Balance assist

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

3. Guide rail guidance

Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

4. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

5. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

Industrial factory Garage Door

4、Industrial factory Garage Door HD picture real shot

Its appearance design is exquisite and elegant. The following is a high-definition picture of the factory for Anbixin's customers to choose and buy. You can contact online customer service at any time, make an appointment to visit the factory and take a shuttle bus from Anbixin door industry.。

Industrial factory Garage Door

Note: All the pictures in this article were taken by Anbixin manufacturer.。

5、Advantages of Industrial factory Garage Door principle

The Industrial factory Garage Door has the following principles.

1. Balanced system

Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during opening and closing, reduce the load of the motor, and ensure that the door can be stably stopped at any position.

2. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

3. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

4. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

5. Balanced system

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

Industrial factory Garage Door

6、Company selection skills

Choosing a suitable Industrial factory Garage Door manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Industrial factory Garage Door products that meet the demand and have good cost performance.。

Anbixin door industry

Industrial factory Garage DoorThe overall structural design is simple and novel.，it has the structure of security apparatus/device/equipment, Door panel structure, Drive system, Track device and control system，is a popular Industrial factory Garage Door。