Brief introduction and advantages of Industrial fast Sectional Door

Industrial fast Sectional DoorAlso known as industrial sliding doors, vertical lift door or electric lift door.，it has the functions of Intelligent control, Flexible opening and closing, attractive and durable, Wind resistance and stability and Safety protection，the main features are Flexible installation mode, Smooth and quiet operation, Beautiful appearance design, Various control methods and Flexible and convenient installation，is a kind of high quality and low price Industrial fast Sectional Door，reliable quality。

1、Brief introduction of Industrial fast Sectional Door

Industrial fast Sectional DoorAs an efficient and practical industrial door equipment，it is widely used incold chain,industry,aviation,automobile,logistics and other industries，in the course of work,The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.，the advantage is Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.、Equipped with multiple safety devices, such as anti-falling, infrared sensing, etc., it runs smoothly and ensures the safety of personnel and goods.、Door panels are usually made of double-sided colored steel plates filled with polyurethane to ensure long-term use.、A variety of colors are available, and the embossed surface design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.、It is made of high-strength colored steel plate or steel skeleton, matched with high-quality filling materials, and treated with anti-corrosion and anti-rust, which has the advantages of impact resistance, wear resistance and long service life.，It has a wide range of uses, including Aircraft maintenance depot, Logistics distribution center, Automobile manufacturing workshop, Industrial workshop warehouse and Aircraft maintenance depot。

Industrial fast Sectional Door

2、Industrial fast Sectional Door structure composition

The Industrial fast Sectional Door structure is introduced as follows:

1. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

2. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

3. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

4. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

5. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

Industrial fast Sectional Door

3、Industrial fast Sectional Door application

Industrial fast Sectional Doors have the following purposes.

1. Cold chain storage place

Excellent thermal insulation performance can reduce the loss of cold energy in the cold storage, maintain a low temperature environment and reduce energy consumption.

2. Aircraft maintenance depot

The oversize lift door is suitable for aircraft maintenance garage, which is convenient for aircraft to enter and exit, and it is wind-resistant and stable to deal with complex outdoor environment.

3. Automobile manufacturing workshop

Meet the requirements of large-scale equipment and vehicles in and out of the automobile production line, and maintain the stable production environment of the workshop with the function of heat preservation and sound insulation.

4. Logistics distribution center

Adapt to the oversized doorway of the logistics center, quickly lift and improve the turnover efficiency of goods, and the sealing performance is effective against dust and moisture.

5. Industrial workshop warehouse

It is used for the entrance and exit of industrial workshops and large warehouses, ensuring the frequent entry and exit of goods transport vehicles, and its durable characteristics can resist daily collisions.

Industrial fast Sectional Door

4、Industrial fast Sectional Door principle

The principle of Industrial fast Sectional Door is introduced as follows:

1. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

2. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

3. Balance assist

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

4. Guide rail guidance

Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

5. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

Industrial fast Sectional Door

5、Functional advantages of Industrial fast Sectional Door

Industrial fast Sectional Doors have the following advantages.

1. Flexible and convenient installation

There are various installation methods, and the site requirements are low. According to the size of the doorway, the space and depth of the upper and lateral parts, standard lifting, high lifting, vertical lifting and inclined top lifting can be selected.

2. Various control methods

Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.

3. Excellent thermal insulation

Polyurethane and other filling materials can effectively block heat transfer, reduce indoor and outdoor heat exchange, reduce energy consumption and keep indoor temperature stable.

4. Flexible installation

A variety of lifting methods can be selected, which can be flexibly installed according to the size of the doorway and the space at the top and side of different venues, with strong adaptability.

5. Run smoothly and smoothly

The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.

Industrial fast Sectional Door

6、Anbixin door industry's strength

The company has many years of Industrial fast Sectional Door manufacturing experience, large scale and strong strength.。

Anbixin

Industrial fast Sectional Doorthe product looks beautiful.，Beautiful appearance design,Strong, wind-resistant and stable,Beautiful and generous appearance,Smooth and quiet operation,Safe and reliable。