Brief introduction and advantages of Industrial pneumatic cylinder Vertical Lift Door

Industrial pneumatic cylinder Vertical Lift DoorAlso called industrial lifting door, it is a door device with vertical lifting function.，the product looks atmospheric.。

1、Brief introduction of Industrial pneumatic cylinder Vertical Lift Door

Industrial pneumatic cylinder Vertical Lift DoorIt is a kind of door equipment used for the entrance and exit of industrial places.，Mainly used forAutomobile manufacturing workshop,Aircraft maintenance depot,Cold chain storage place,Industrial workshop warehouse andAircraft maintenance depot，is a common Industrial pneumatic cylinder Vertical Lift Door，Widely used inLogistics distribution center,Automobile manufacturing workshop,Cold chain storage place,Industrial workshop warehouse,Logistics distribution center and so on，is an advanced Industrial pneumatic cylinder Vertical Lift Door developed by our company in combination with the actual situation of the industry。

Industrial pneumatic cylinder Vertical Lift Door

2、Industrial pneumatic cylinder Vertical Lift Door characteristics

The Industrial pneumatic cylinder Vertical Lift Door features are as follows:

1. Excellent sound insulation and noise reduction

Block external noise and create a quiet space.

2. Multiple safety protection

Equipped with a variety of safety devices to ensure safety.

3. Flexible installation mode

Adapt to different scenes, convenient installation.

4. Beautiful and generous appearance

Simple modeling, enhance the architectural image

5. Strong, wind-resistant and stable

Reasonable structural design, resistant to strong winds.

Industrial pneumatic cylinder Vertical Lift Door

3、Advantages of Industrial pneumatic cylinder Vertical Lift Door principle

The Industrial pneumatic cylinder Vertical Lift Door has the following principles.

1. Balanced system

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

2. Guide rail guidance

Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

3. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

4. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

5. Balance assist

Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during opening and closing, reduce the load of the motor, and ensure that the door can be stably stopped at any position.

Industrial pneumatic cylinder Vertical Lift Door

4、Industrial pneumatic cylinder Vertical Lift Door structure composition

The Industrial pneumatic cylinder Vertical Lift Door has the following structure

1. control system

Including control box, operation button and remote controller, supporting manual and remote control; Some parts are equipped with automatic induction modules, which can adjust the stroke and running speed of door panels according to requirements.

2. driving gear

Consist of a motor, a reducer, a chain or a belt, wherein that motor drive the reel to rotate, and the door panel is lifted through a transmission part; The balance system with torsion spring or counterweight can reduce the load of motor and ensure the smooth operation of the door body.

3. Door panel system

It adopts colored steel plate or steel skeleton, and is filled with heat preservation materials such as polyurethane and rock wool. After anticorrosion and antirust treatment, it has both strength and heat preservation performance.

4. Security configuration

Equipped with anti-falling device, airbag, wire rope fracture protection, infrared induction, etc., to ensure the safety of use in all directions and prevent accidents.

5. Track assembly

Steel rails vertically installed on both sides of the door opening provide accurate guidance for the door panel, with smooth surface, reducing friction and ensuring stable and sway-free door panel lifting process.

Industrial pneumatic cylinder Vertical Lift Door

5、Industrial pneumatic cylinder Vertical Lift Door advantage

The advantages of Industrial pneumatic cylinder Vertical Lift Door are as follows:

1. Excellent sealing performance

Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded and keep the room clean and dry.

2. Various control methods

Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.

3. Beautiful appearance design

A variety of colors are available, and the embossed design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.

4. Efficient heat preservation

The interior is filled with thermal insulation materials, which effectively blocks heat transfer, reduces energy consumption and maintains indoor temperature stability.

5. Run smoothly and smoothly

The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.

Industrial pneumatic cylinder Vertical Lift Door

6、Advantages of Industrial pneumatic cylinder Vertical Lift Door principle

The principle of Industrial pneumatic cylinder Vertical Lift Door is introduced as follows:

1. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

2. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

3. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

4. Balance assist

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

5. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

Industrial pneumatic cylinder Vertical Lift Door

Industrial pneumatic cylinder Vertical Lift Doormultifunctional, with functions such as Wind resistance and stability, attractive and durable, Flexible opening and closing, smooth running and sturdy and durable，The overall structural design is relatively simple，it is mainly composed of Track device, Door panel structure, Drive system, control system and security apparatus/device/equipment。