Anbixin  Industrial Doors+86 198 5167 5299

Brief introduction and advantages of Industrial type Sectional Door

2025-7-9

Industrial type Sectional DoorIt is a kind of industrial door equipment that can be opened and closed efficiently and quickly. It is mainly used for the entrances and exits of industrial workshops, logistics warehouses and other places to achieve rapid isolation, heat preservation and dust prevention.,super quality and competitive price。The following is to introduce the Industrial type Sectional Door:

1、Brief introduction of Industrial type Sectional Door

Industrial type Sectional DoorAs an efficient and practical industrial door equipment,the advantage is It effectively hinders the sound transmission, and both industrial noise and external noise can greatly reduce the volume introduced into the room.、A variety of colors are available, and the embossed surface design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.、Equipped with multiple safety devices, such as anti-falling, infrared sensing, etc., it runs smoothly and ensures the safety of personnel and goods.、Door panels are usually made of double-sided colored steel plates filled with polyurethane to ensure long-term use.、It is made of high-strength colored steel plate or steel skeleton, matched with high-quality filling materials, and treated with anti-corrosion and anti-rust, which has the advantages of impact resistance, wear resistance and long service life.,is designed by Anbixin with advanced technology。

Industrial type Sectional Door

Industrial type Sectional Door

2、Industrial type Sectional Door display

Beautiful design, excellent material selection and excellent quality.。

Industrial type Sectional Door

Industrial type Sectional Door

Note: All the pictures in this article were taken by Anbixin door industry manufacturer.。

3、Introduction of Industrial type Sectional Door characteristics

Industrial type Sectional Door has the following characteristics

  1. Tightly sealed and dustproof
  2. Prevent dust and sundries from entering the room.

  3. Thick, strong and durable
  4. Made of high-quality materials, durable and not easy to damage.

  5. Strong, wind-resistant and stable
  6. Reasonable structural design, resistant to strong winds.

  7. Efficient heat preservation and energy saving
  8. Effectively reduce heat loss and save energy consumption.

  9. Flexible installation mode
  10. Adapt to different scenes, convenient installation.

Industrial type Sectional Door

Industrial type Sectional Door

4、Industrial type Sectional Door principle

The principle of Industrial type Sectional Door is introduced as follows:

  1. Reel traction
  2. After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

  3. Guide rail guidance
  4. Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

  5. Balance assist
  6. A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

  7. motor drive
  8. The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

  9. Reel traction
  10. After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

Industrial type Sectional Door

Industrial type Sectional Door

5、Industrial type Sectional Door advantage

The advantages of Industrial type Sectional Door are as follows:

  1. Flexible installation
  2. A variety of lifting methods can be selected, which can be flexibly installed according to the size of the doorway and the space at the top and side of different venues, with strong adaptability.

  3. Various control methods
  4. Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.

  5. Excellent thermal insulation
  6. Polyurethane and other filling materials can effectively block heat transfer, reduce indoor and outdoor heat exchange, reduce energy consumption and keep indoor temperature stable.

  7. Flexible and convenient installation
  8. There are various installation methods, and the site requirements are low. According to the size of the doorway, the space and depth of the upper and lateral parts, standard lifting, high lifting, vertical lifting and inclined top lifting can be selected.

  9. Beautiful appearance design
  10. A variety of colors are available, and the embossed design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.

Industrial type Sectional Door

Industrial type Sectional Door

6、Industrial type Sectional Door price consultation

The Industrial type Sectional Door price is introduced as follows:

  1. cost of production
  2. The production cost is mainly the purchase of raw materials. Anbixin door industry attaches great importance to the purchase of raw materials to ensure the comprehensive quality of products. Only excellent raw materials can produce excellent products, and the input cost of raw materials has a direct relationship with the formulation of product prices. Under the premise of ensuring excellent product performance, Anbixin strives to reduce the input cost of products, and customers are very satisfied with this.

  3. market competition
  4. When there are many customers who need this product in the market, and the supply quantity of the manufacturer is limited, there is not so much inventory at all. At this time, the demand will be in short supply, and the price of the Industrial type Sectional Door will be very high.

  5. After-sales service level
  6. Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Industrial type Sectional Door price and service can meet the actual needs of customers.

  7. Different regions
  8. Different provinces and regions have different consumption levels, different market positioning and different prices.

  9. technology content
  10. The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

Industrial type Sectional Door

Industrial type Sectional Door

Industrial type Sectional DoorA balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.,is a kind of high quality and low price Industrial type Sectional Door,Flexible and diverse control,Flexible installation mode,Efficient heat preservation,Flexible installation,sturdy and durable。