Brief introduction and advantages of Manufacturer fast stacking door

Manufacturer fast stacking doorIt is a professional industrial door equipment with high sealing, thermal insulation and wind resistance by using the principle of rapid lifting and stacking.。The following is to introduce the Manufacturer fast stacking door:

1、Brief introduction of Manufacturer fast stacking door

Manufacturer fast stacking doorAs a high-performance industrial door equipment，at work,The door curtain is composed of several independent PVC base fabrics connected by hinges, and the motor drives the transmission mechanism to run, which drives the connector at the top of the door curtain to move upwards.。

Manufacturer fast stacking door

2、Manufacturer fast stacking door display

The Manufacturer fast stacking door has a beautiful appearance and atmosphere for our customers' reference.。

Manufacturer fast stacking door

Note: All the pictures in this article were taken by Anbixin door industry manufacturer.。

3、Structural advantages of Manufacturer fast stacking door

The Manufacturer fast stacking door has the following structure

1. Door curtain structure

It is composed of several pieces of high-strength PVC base cloth, and the built-in polyester fiber grid cloth enhances the wind resistance. The pieces are connected by special connectors and can be flexibly folded and piled up.

2. Bottom device

The bottom-weighted air barrier cloth or airtight airbag is closely attached to the ground, effectively blocking airflow and dust and improving sealing effect.

3. Track layout

The circular track at the top provides space for the folding of the door curtain, and the wind-proof brush is installed on the side track to enhance the sealing performance; Track design ensures that the curtain runs smoothly and occupies little space.

4. control unit

Support button, remote control, radar induction, geomagnetic induction and other control modes, and accurately adjust the motor operation through the controller to meet the needs of different scenes.

5. Drive system

Driven by motor and matched with chain transmission mechanism, the power is transmitted to the door curtain to realize the rapid folding and unfolding of the door body.

Manufacturer fast stacking door

4、Manufacturer fast stacking door application

Manufacturer fast stacking doors have the following purposes.

1. Food processing workshop

Effectively isolate the environment inside and outside the workshop, stop dust and mosquitoes, keep the workshop clean and meet the food hygiene standards.

2. Textile and garment warehouse

Prevent dust from entering the warehouse, protect the cleanliness of textile and clothing products, and reduce air circulation to avoid moisture.

3. Large supermarket back door

It is used in the commercial supermarket cargo transportation channel, occupying small space, keeping the indoor temperature sealed and isolated, and reducing the energy consumption of air conditioning.

4. Logistics high-speed channel

In the logistics park, the high-speed passage is frequently opened, which saves time and improves the efficiency of cargo handling.

5. Medicine warehouse

Good sealing performance can prevent external pollution, maintain the stability of temperature and humidity in the warehouse and ensure the safety of drug storage.

Manufacturer fast stacking door

5、Advantages of Manufacturer fast stacking door principle

The Manufacturer fast stacking door has the following principles.

1. control system

Equipped with advanced control system, it can realize various control modes, such as button control, remote control and induction control. The control system can accurately control the running speed and stroke of the motor, ensure that the door body runs accurately according to the set program, and also has the safety protection function, and automatically stops or rebounds in case of obstacles.

2. Motor and transmission

Driven by motor, the door body is folded and unfolded by chain transmission system. The power of the motor is transmitted to the connection points of each door panel, so that the door panels can be folded and stacked in an orderly manner.

3. Sealing block flow

The bottom of the door curtain is equipped with a weighted air barrier cloth or an airtight airbag, and when the door body is closed, the air barrier cloth or airbag is closely attached to the ground; Windproof brushes are installed on both sides of the doorpost, which are in close contact with the side of the door curtain. These sealing structures effectively block the entry of airflow, dust and mosquitoes, and keep the indoor environment clean and the temperature stable.

4. chain and sprocket drive

As a power source, the motor transmits the power to the transmission parts of the door curtain through the chain. The chain is meshed with the sprocket or gear at the top of the door curtain. When the motor rotates, the chain drives the sprocket or gear to rotate, and then drives the door curtain to fold and unfold, thus ensuring the stability and reliability of the door body.

5. Folding accumulation

The door curtain is composed of several independent PVC base fabrics connected by hinges, and the motor drives the transmission mechanism to run, which drives the connector at the top of the door curtain to move upward. Each door curtain is folded in turn and stacked above the door opening like an accordion to realize the quick opening of the door body; When closed, the transmission mechanism moves in the opposite direction, and the door curtain is unfolded one by one and restored to its original state.

Manufacturer fast stacking door

6、Manufacturer fast stacking door price advantage

The Manufacturer fast stacking door price is introduced as follows:

1. Manufacturer scale

There are many Manufacturer fast stacking door manufacturers on the market. Different manufacturers spend different costs, such as material costs, labor costs, manufacturing costs, etc., and their products are quoted differently.

2. Different regions

If the location of the manufacturer is superior, its transportation will be more convenient. Anbixin the address is located at:Jiangsu(Province) has convenient transportation, which provides a good convenience for the transportation of Manufacturer fast stacking door.

3. select a qualified person

The quality of material selection is one of the main factors that directly affect the Manufacturer fast stacking door. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

4. quality factor

The price of Manufacturer fast stacking door is affected by the quality of products. Only when the products are of good quality can we create greater profits for customers and recover the costs for customers as soon as possible. However, products with good quality have a lot of investment in technology, manpower and time, so their prices are higher than those of ordinary products. On the contrary, the products of general quality are equal in effort and gain, and the sales price is also low. But there are exceptions. Many manufacturers often adopt the mode of small profits but quick turnover. If customers can choose products with high cost performance, it is a good choice for long-term investment.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Manufacturer fast stacking door

Manufacturer fast stacking doorStructure consists of control system, Track system, Drive system, Door curtain structure, Bottom device and so on，productSimple structure and reliable operation.，It has the functions of Textile and garment warehouse, Food processing workshop, Medicine warehouse, Medicine warehouse and Food processing workshop。