Brief introduction and advantages of Electronics factory processing stacking door
Electronics factory processing stacking doorAlso known as flexible stacking door, high-speed stacking door or industrial stacking door, it is an automatic door body that is driven by motor and folded by multiple PVC cords to realize rapid lifting.。
1、Brief introduction of Electronics factory processing stacking door
Electronics factory processing stacking doorIt is a professional industrial door equipment with high sealing, thermal insulation and wind resistance by using the principle of rapid lifting and stacking.,it is an ideal choice for customers to buy Electronics factory processing stacking door。
Electronics factory processing stacking door
2、Electronics factory processing stacking door use
The purpose of Electronics factory processing stacking door is introduced as follows:
- Textile and garment warehouse
- Large supermarket back door
- Logistics high-speed channel
- Medicine warehouse
- Food processing workshop
Prevent dust from entering the warehouse, protect the cleanliness of textile and clothing products, and reduce air circulation to avoid moisture.
It is used in the commercial supermarket cargo transportation channel, occupying small space, keeping the indoor temperature sealed and isolated, and reducing the energy consumption of air conditioning.
In the logistics park, the high-speed passage is frequently opened, which saves time and improves the efficiency of cargo handling.
Good sealing performance can prevent external pollution, maintain the stability of temperature and humidity in the warehouse and ensure the safety of drug storage.
Effectively isolate the environment inside and outside the workshop, stop dust and mosquitoes, keep the workshop clean and meet the food hygiene standards.
Electronics factory processing stacking door
3、Electronics factory processing stacking door performance advantage
Electronics factory processing stacking doors have the following advantages.
- Good energy-saving effect
- Good wind resistance
- Comprehensive safety protection
- Tight seal
- Adapt to a wide range of environments
Quickly open and close to reduce air convection, with the door curtain made of high-efficiency thermal insulation material, reduce indoor heat or cold air loss and save energy consumption of air conditioning.
The door curtain is built with high-strength polyester fiber mesh cloth, which can resist 8-10 strong winds and keep the door body stable with the side border wind brush and bottom weighted air insulation cloth.
Equipped with infrared safety protection device, airbag, wire rope breakage protection, etc., it automatically stops and runs in reverse when encountering obstacles, avoiding people and objects from being caught, and ensuring the safety of people and goods.
The bottom and doorpost are tightly sealed, which can effectively block dust, airflow and mosquitoes and keep the indoor environment clean.
Strong weather resistance, can work normally in the environment of-30℃-70℃, and can run stably in both cold north and high temperature south.
Electronics factory processing stacking door
4、Structural characteristics of Electronics factory processing stacking door
The Electronics factory processing stacking door structure is introduced as follows:
- Track layout
- Drive system
- Door curtain structure
- Bottom device
- control unit
The circular track at the top provides space for the folding of the door curtain, and the wind-proof brush is installed on the side track to enhance the sealing performance; Track design ensures that the curtain runs smoothly and occupies little space.
Driven by motor and matched with chain transmission mechanism, the power is transmitted to the door curtain to realize the rapid folding and unfolding of the door body.
It is composed of several pieces of high-strength PVC base cloth, and the built-in polyester fiber grid cloth enhances the wind resistance. The pieces are connected by special connectors and can be flexibly folded and piled up.
The bottom-weighted air barrier cloth or airtight airbag is closely attached to the ground, effectively blocking airflow and dust and improving sealing effect.
Support button, remote control, radar induction, geomagnetic induction and other control modes, and accurately adjust the motor operation through the controller to meet the needs of different scenes.
Electronics factory processing stacking door
5、Electronics factory processing stacking door price
The Electronics factory processing stacking door price is introduced as follows:
- market competition
- technology
- Quality advantages and disadvantages
- product function
- Model type
If there is a large demand for Electronics factory processing stacking door in the market, the price of Electronics factory processing stacking door will naturally become higher. On the contrary, if the supply of this product exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will become lower.
The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.
The Electronics factory processing stacking door is made of high-quality materials, and the cost of the product is high, so the price of the product will also rise. Anbixin door industry has always adhered to high quality in the construction of Electronics factory processing stacking door and won the trust of customers.
The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.
The quotation of the same series of Electronics factory processing stacking door with different specifications and models is different. The larger the model, the higher the product cost and the higher the overall quotation. On the contrary, the smaller the model, the lower the product cost and the lower the overall quotation.
Electronics factory processing stacking door
6、company profile
Anbixin door industry, as one of the professional and powerful Electronics factory processing stacking door manufacturers in Jiangsu(Province), produces Electronics factory processing stacking door with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。
Anbixin
Electronics factory processing stacking doorit has the functions of smooth running, Sound insulation and noise reduction, attractive and durable, Wind resistance and stability and Safety protection,it is widely used in logistics, Super, spin and weave, medicine and logistics。
Related Recommendations
-
What is a Workshop sensor-activated Vertical Lift Door? Introduction to the principle of Vertical Lift Door structure
2025-6-16 -
What is a Electric high-lift Vertical Lift Door? Vertical Lift Door specifications, models, and parameters
2025-6-16 -
Aluminum alloy Sectional Door detailed introduction
2025-7-9 -
What is a Aluminum alloy electric Sectional Door? Introduction to the principle of Sectional Door structure
2025-6-16 -
Introduction to Underground garage PVC fast stacking door, advantages, characteristics and principles of Stacking Rapid Door
2025-6-16 -
Introduction to Garage insulated Vertical Lift Door, introduction to Vertical Lift Door advantages and characteristics
2025-6-16 -
Brief introduction and advantages of 10-meter large stacking door
2025-7-9 -
Introduction to Underground Parking Turbine Spiral Door and High speed Spiral Door working principle
2025-6-16 -
Introduction to Ground Magnetic Inductive High-Speed Door and High-Speed Door working principle
2025-6-16 -
Brief introduction and advantages of Garage Roller Shutter Door Spiral Door
2025-7-9