Brief introduction and advantages of Industrial high-lift Vertical Lift Door

Industrial high-lift Vertical Lift DoorAlso known as industrial sliding doors, vertical lifting door or electric lifting door, it is a kind of door body equipment that relies on motor drive and guide rail to realize lifting movement.，the product looks beautiful.，Commonly used inAutomobile manufacturing workshop,Industrial workshop warehouse,Logistics distribution center,Logistics distribution center,Aircraft maintenance depot and so on，at the start of the operation,A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.，it is an ideal choice for customers to buy Industrial high-lift Vertical Lift Door。The following is to introduce the Industrial high-lift Vertical Lift Door:

1、Brief introduction of Industrial high-lift Vertical Lift Door

Industrial high-lift Vertical Lift DoorIt is a kind of industrial door equipment that can be opened and closed efficiently and quickly. It is mainly used for the entrances and exits of industrial workshops, logistics warehouses and other places to achieve rapid isolation, heat preservation and dust prevention.，is a Industrial high-lift Vertical Lift Door，the main features are Flexible installation, Efficient heat preservation, Good sound insulation and noise reduction, Beautiful and generous appearance and Tightly sealed and dustproof，Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.、The structural design is reasonable, and some lifting doors can resist 10-level wind speed. For example, the torsion spring rib lifting structure is adopted to make the door body more firm.、Each port of the door frame is equipped with high-quality rubber sealing strips, which can effectively block airflow, dust and rain, prevent the door from being corroded, and keep the room clean and dry.、It effectively hinders the sound transmission, and both industrial noise and external noise can greatly reduce the volume introduced into the room.、Polyurethane and other filling materials can effectively block heat transfer, reduce indoor and outdoor heat exchange, reduce energy consumption and keep indoor temperature stable.，widely used in aviation, logistics, automobile, cold chain, industry and other fields。

Industrial high-lift Vertical Lift Door

2、Industrial high-lift Vertical Lift Door display

Anbixin Industrial high-lift Vertical Lift Doorthe product looks atmospheric., the picture is taken.。

Industrial high-lift Vertical Lift Door

Note: All the pictures in this article were taken by Anbixin door industry manufacturer.。

3、Industrial high-lift Vertical Lift Door use

The purpose of Industrial high-lift Vertical Lift Door is introduced as follows:

1. Logistics distribution center

Adapt to the oversized doorway of the logistics center, quickly lift and improve the turnover efficiency of goods, and the sealing performance is effective against dust and moisture.

2. Aircraft maintenance depot

The oversize lift door is suitable for aircraft maintenance garage, which is convenient for aircraft to enter and exit, and it is wind-resistant and stable to deal with complex outdoor environment.

3. Industrial workshop warehouse

It is used for the entrance and exit of industrial workshops and large warehouses, ensuring the frequent entry and exit of goods transport vehicles, and its durable characteristics can resist daily collisions.

4. Automobile manufacturing workshop

Meet the requirements of large-scale equipment and vehicles in and out of the automobile production line, and maintain the stable production environment of the workshop with the function of heat preservation and sound insulation.

5. Cold chain storage place

Excellent thermal insulation performance can reduce the loss of cold energy in the cold storage, maintain a low temperature environment and reduce energy consumption.

Industrial high-lift Vertical Lift Door

4、Industrial high-lift Vertical Lift Door principle

The principle of Industrial high-lift Vertical Lift Door is introduced as follows:

1. motor drive

The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

2. Reel traction

After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

3. Track guidance

The two sides of the door panel are installed on vertical guide rails, which provide accurate guidance for the door panel, ensure that the door keeps moving in a straight line during the lifting process, without shaking or deviation, and improve the running stability and sealing performance of the door.

4. Guide rail guidance

Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

5. Balanced system

A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

Industrial high-lift Vertical Lift Door

5、Industrial high-lift Vertical Lift Door HD real shot

You can buy Industrial high-lift Vertical Lift Door according to your needs and show you product videos.。

Industrial high-lift Vertical Lift Door

As you can see from the live video.，Anbixin the product looks atmospheric.。

6、Industrial high-lift Vertical Lift Door application

Industrial high-lift Vertical Lift Doors have the following purposes.

1. Logistics distribution center

Adapt to the oversized doorway of the logistics center, quickly lift and improve the turnover efficiency of goods, and the sealing performance is effective against dust and moisture.

2. Aircraft maintenance depot

The oversize lift door is suitable for aircraft maintenance garage, which is convenient for aircraft to enter and exit, and it is wind-resistant and stable to deal with complex outdoor environment.

3. Automobile manufacturing workshop

Meet the requirements of large-scale equipment and vehicles in and out of the automobile production line, and maintain the stable production environment of the workshop with the function of heat preservation and sound insulation.

4. Industrial workshop warehouse

It is used for the entrance and exit of industrial workshops and large warehouses, ensuring the frequent entry and exit of goods transport vehicles, and its durable characteristics can resist daily collisions.

5. Cold chain storage place

Excellent thermal insulation performance can reduce the loss of cold energy in the cold storage, maintain a low temperature environment and reduce energy consumption.

Industrial high-lift Vertical Lift Door

Industrial high-lift Vertical Lift Doorthe advantage is The interior is filled with thermal insulation materials, which effectively blocks heat transfer, reduces energy consumption and maintains indoor temperature stability.、It is made of high-strength colored steel plate or steel skeleton, matched with high-quality filling materials, and treated with anti-corrosion and anti-rust, which has the advantages of impact resistance, wear resistance and long service life.、Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.、Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.、The interior is filled with thermal insulation materials, which effectively blocks heat transfer, reduces energy consumption and maintains indoor temperature stability.，It can be used for Industrial workshop warehouse, Automobile manufacturing workshop, Cold chain storage place, Logistics distribution center, Aircraft maintenance depot, Cold chain storage place and so on，It is a kind of door equipment used for the entrance and exit of industrial places.。