Anbixin  Industrial Doors+86 198 5167 5299

Brief introduction and advantages of Industrial multi-segment Garage Door

2025-7-9

Industrial multi-segment Garage DoorIt is an industrial door device with high efficiency and quick opening and closing.,the principle is simple.Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.。The following is to introduce the Industrial multi-segment Garage Door:

1、Brief introduction of Industrial multi-segment Garage Door

Industrial multi-segment Garage DoorAlso known as industrial sliding doors, vertical lift door or electric lift door.,the advantage is Equipped with anti-fall, airbag, wire rope fracture protection, torsion spring fracture protection, infrared induction and other devices to ensure the safety of use in all directions.、A variety of lifting methods can be selected, which can be flexibly installed according to the size of the doorway and the space at the top and side of different venues, with strong adaptability.、The structural design is reasonable, and some lifting doors can resist 10-level wind speed. For example, the torsion spring rib lifting structure is adopted to make the door body more firm.、Equipped with multiple safety devices, such as anti-falling, infrared sensing, etc., it runs smoothly and ensures the safety of personnel and goods.、A variety of colors are available, and the embossed surface design of some door panels is not only durable, but also easy to clean, which can enhance the overall image of the building.,Widely used inIndustrial workshop warehouse,Automobile manufacturing workshop,Aircraft maintenance depot,Industrial workshop warehouse,Logistics distribution center and so on。

Industrial multi-segment Garage Door

Industrial multi-segment Garage Door

2、Introduction of Industrial multi-segment Garage Door characteristics

The Industrial multi-segment Garage Door features are as follows:

  1. Smooth and quiet operation
  2. Low noise during operation and comfortable experience.

  3. Flexible installation mode
  4. Adapt to different scenes, convenient installation.

  5. Efficient heat preservation and energy saving
  6. Effectively reduce heat loss and save energy consumption.

  7. Strong, wind-resistant and stable
  8. Reasonable structural design, resistant to strong winds.

  9. Beautiful and generous appearance
  10. Simple modeling, enhance the architectural image

Industrial multi-segment Garage Door

Industrial multi-segment Garage Door

3、Industrial multi-segment Garage Door function

Industrial multi-segment Garage Doormultifunctional, with functions such as sturdy and durable, smooth running, Wind resistance and stability, Intelligent control and Safety protection,Widely used in Cold chain storage place, Industrial workshop warehouse, Automobile manufacturing workshop, Aircraft maintenance depot and Cold chain storage place,the main structure includes control system, Drive system, security apparatus/device/equipment, Track device, Door panel structure and so on,Industrial multi-segment Garage DoorThe structural design is more advanced and reasonable.,is designed by Anbixin door industry with advanced technology。

Industrial multi-segment Garage Door

Industrial multi-segment Garage Door

4、Introduction of advantages of Industrial multi-segment Garage Door

The advantages of Industrial multi-segment Garage Door are as follows:

  1. sturdy and durable
  2. It is made of high-strength colored steel plate or steel skeleton, matched with high-quality filling materials, and treated with anti-corrosion and anti-rust, which has the advantages of impact resistance, wear resistance and long service life.

  3. Various control methods
  4. Support wireless remote control, control box button operation, but also through photoelectric or geomagnetic sensors to automatically control the opening and closing, to meet the needs of different scenes.

  5. Run smoothly and smoothly
  6. The motor is specially designed for industrial doors, with a power supply voltage of 220V to 380V, running smoothly and with low noise.

  7. Good sound insulation and noise reduction
  8. It forms an effective obstacle to sound transmission, and whether it is industrial noise or external noise, it can greatly reduce the volume introduced into the room.

  9. The material is sturdy and durable.
  10. Door panels are usually made of double-sided color steel plates filled with polyurethane to ensure long-term use.

Industrial multi-segment Garage Door

Industrial multi-segment Garage Door

5、Industrial multi-segment Garage Door principle

The Industrial multi-segment Garage Door has the following principles.

  1. Balance assist
  2. A balance system is composed of a torsion spring or a counterweight. The torsion spring is tightened in advance to generate elastic potential energy, and the counterweight acts through gravity to form a moment that is balanced with the weight of the door. In the process of lifting the door body, the balancing system reduces the motor load, so that the door panel can easily stay at any position and reduce the running noise.

  3. Reel traction
  4. After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

  5. motor drive
  6. The motor drives the reel to rotate, and the door panel is lifted up along the guide rail by chain transmission, thus realizing the opening of the door; When it is closed, the door panel is slowly lowered by the reverse rotation of the motor.

  7. Guide rail guidance
  8. Guide rails installed vertically on both sides of the door opening provide accurate guidance for the door panel. The pulley or guide device at the edge of the door panel is embedded in the guide rail groove. When the door body rises and falls, the guide rail restricts the door panel from moving in a straight line, preventing the door panel from shaking and shifting, ensuring stable operation and enhancing the sealing performance of the door body.

  9. Reel traction
  10. After the motor is energized, it drives the reel to rotate, and the chain wound on the reel is tightened by the chain transmission device, so as to draw the door panel to move upward along the vertical guide rail and realize the opening of the door body; When the motor is turned off, the door panel descends smoothly along the guide rail with the help of its own gravity and balance system.

Industrial multi-segment Garage Door

Industrial multi-segment Garage Door

Industrial multi-segment Garage Doorat work,Equipped with balance system, usually using torsion spring or counterweight device. The torsion spring generates a moment that is balanced with the weight of the door through the pre-tightening force, so that the door can keep balance during the opening and closing process, reduce the load of the motor, and ensure that the door can be stably stopped at any position.,the product looks beautiful.,It has a wide range of uses, including Cold chain storage place, Automobile manufacturing workshop, Aircraft maintenance depot, Logistics distribution center and Industrial workshop warehouse。